Model 2033P-FMCD — Premium
STEAMIX® Model 2033P-FMCD is a steam/water mixing valve
of brass/stainless steel construction. The valve is supplied as standard
with integral inlet supply risers comprising 3/4" Y-type strainers and
3/4" ball valves cross-linked by a stainless steel bridge piece and
lever for simultaneous on/off control of both inlet supplies. The unit
is supplied fully assembled, pressure-tested and installed on a
stainless steel hose rack.
STEAMIX Model 2033P-FMCD includes a stainless steel dual-scale
outlet thermometer, 25 feet of “safety yellow” washdown hose,
low-heat-transfer polymer spray nozzle with trigger guard, swivel
adapter, a stainless steel nozzle hook and inlet check valves.
STEAMIX Model 2033P-FMCD includes Type-304 stainless steel, two-door
cabinet with a 2" (50 mm) flange, and it is designed for recessed
installation. The cabinet doors have a recessed “toggle” handle. All
exposed surfaces have a #4 brushed finish. The bottom of the cabinet is
crosscut to drain any water accidentally discharged within the cabinet.
FMCD cabinets are manufactured to order and can be modified to
include customer requirements such as increased dimensions, vacuum
breakers, compressed air and/or fluid lines, pressure-reducing valves
and gauges, extra hose lengths, and more.
STEAMIX® Steam and Water Hose Stations and Mixing Units will not pass live steam.
Steamix mixing valve, featured on all Steamix steam and water hose
stations by Armstrong, will not pass live steam in the event of either a
significant pressure reduction or complete failure of the cold-water
Steamix is designed to improve efficiency and reduce risk when
mixing steam and water for washdown. When your process demands high
washdown temperatures, adjusting the mix of steam and water becomes much
more difficult and dangerous. With the older style dual-globe valve
mixing “Y,” it is too easy to introduce too much steam—with risky
consequences for your personnel. Here’s why it’s no problem with
- In the event of either a complete failure of the inlet cold-water
supply or a reduction in cold-water pressure to below 20 (+/-5) psi (1.4
bar), STEAMIX will respond with a complete shutdown of outlet flow.
- If there is a structural failure of the primary operating component (diaphragm), STEAMIX will “fail safe” to cold water.
- To prevent over-temperature selection by the user and the potential
for overheated water and flash steam presentation common with other
types of hose stations, STEAMIX can be supplied with either a
single-temperature lockout or a maximum temperature-limiting option.
Installation and Maintenance
Installation Details Form