952-935-2345   24/7 SUPPORT

FIND PRODUCTS FOR:

Home>Utilization >Steam Traps

MT Series Thermostatic Wafer Steam Trap

MT Series Thermostatic Wafer Steam Trap
MT Series Thermostatic Wafer Steam Trap
Armstrong

Stainless steel or carbon steel

For pressures to 350 psig (24 bar) . . .
Cold water start-up capacities to 1,000 lb/hr (453 kg/hr)

The thermostatic wafer steam trap, the Series MT-2, is sized precisely to handle the extremely low condensate load found in most instrument steam tracer lines. The MT thermostatic wafer traps are designed to last longer than other oversized, all-purpose thermostatic and thermodynamic steam traps.

A water seal prevents loss of steam through the orifice of the MT Series.

The MT Series traps adjust automatically to flow rates, including large start-up loads, at all pressures within their range.




Download Center

Product Literature 

Installation and Maintenance 
Related Items
980 Series Inverted Bucket Steam Traps
980 Series Inverted Bucket Steam Traps
401-SH/501-SH Series Inverted Bucket Superheat Steam Traps
401-SH/501-SH Series Inverted Bucket Superheat Steam Traps
2000 Series Inverted Bucket Steam Traps
2000 Series Inverted Bucket Steam Traps
4000 Series Inverted Bucket Steam Traps
4000 Series Inverted Bucket Steam Traps
SH-900 Series Bimetallic Superheat Steam Traps
SH-900 Series Bimetallic Superheat Steam Traps
SH-300 Series Superheat Traps
SH-300 Series Superheat Traps
Browse Similar Items