952-935-2345   24/7 SUPPORT


Home > Utilization  > Water Heaters

Flo-Rite-Temp Model 665DW

Flo-Rite-Temp Model 665DW
Flo-Rite-Temp Model 665DW

Flo-Rite-Temp Model 665DW Instantaneous Steam/Water Heater features a 6" diameter shell.

Flo-Rite-Temp Model 665DW has 65 GPM capacity with 15PSI steam at a 100°F temperature rise.

The Flo-Rite-Temp Model 665DW Double Wall Instantaneous Water Heater uses a double wall tube to provide positive separation of the steam and water in the heat exchanger. The area between the walls of the tubes vents to atmosphere so you can detect tube failure without cross-contaminating either the steam or water. The Flo-Rite-Temp 665DW is well suited for all hot water applications where steam is available and plumbing codes or safety requirements prevent the heating medium and the portable water supply from being cross-contaminated.

The Flo-Rite-Temp 665DW Instantaneous Steam/Water Heater has a unique feed forward design which features a differential pressure diaphragm actuated mixing unit integral to a shell and tube heat exchanger.

The Flo-Rite-Temp 665DW mixing unit manages the water flow through the heat exchanger based upon downstream hot water demand and eliminates the requirement for a modulating steam control valve.

Operating on constant low pressure (2-15PSI) steam, the Flo-Rite-Temp 665DW mixing unit supplies water to the heat exchanger where it is overheated and then returned to the mixing unit for proportional re-mixing with cold water to a pre-set outlet temperature.

Speed of Response

The differential pressure diaphragm within the mixing unit rapidly responds to a change in system demand and significantly reduces the lag times typically associated with feed back/modulating steam control valve systems.

Failure Safe

The Flo-Rite-Temp 665DW mixing unit's diaphragm actuated design can be described as "failure safe" because in the event of a diaphragm failure the mixing unit will fail with a cold bias and will not allow hot water to exit the heat exchanger.

Temperature Control and User Safety

Capable of controlling outlet temperatures +/-4°F, this principal of operation offers the additional relevant benefit of reducing the waterborne bacterial content of the water during the overheating process. In addition, with no water storage requirement, Flo-Rite-Temp 665DW water heaters are a sensible selection as a component of a broader system design initiative for Legionella risk reduction.

Ease of Maintenance

Non modulating constant steam pressure ensures condensate drainage and removes the potential for water hammer damage and corrosion. There is no steam control valve to maintain and typically no supplemental condensate return equipment required.

Ease of Installation

No storage tank, small footprint, access via a standard doorway and pre-piped packaged solutions reduce installation time, space and expenditure.

  For submittal drawing refer to:
  Model 415   Single Wall   S5640
  Model 415DW   Double Wall   S5641
  Model 535   Single Wall   S5642
  Model 535DW   Double Wall   S5643
  Model 665   Single Wall   S5644
  Model 665DW   Double Wall   S5645
  Model 665SS   Stainless Steel   S5646
  Model 8120   Single Wall   S5647
  Model 8120DW   Double Wall   S5648
  Model 8120SS   Stainless Steel   S5649

Download Center

Product Literature 

Installation and Maintenance 

Installation Details Form 

Submittal Drawing 
Related Items
Flo-Rite-Temp Model 665
Flo-Rite-Temp Model 665
Flo-Rite-Temp Model 8120
Flo-Rite-Temp Model 8120
Flo-Rite-Temp Model 535DW
Flo-Rite-Temp Model 535DW
Flo-Rite-Temp Model 665SS
Flo-Rite-Temp Model 665SS
Flo-Rite-Temp Model 8120SS
Flo-Rite-Temp Model 8120SS
Digital-FloŽ Semi-Storage Water Heating System
Digital-FloŽ Semi-Storage Water Heating System
Browse Similar Items