952-935-2345   24/7 SUPPORT

FIND PRODUCTS FOR:

Home>Utilization >Steam Traps

6000 Series Inverted Bucket Steam Traps

6000 Series Inverted Bucket Steam Traps
6000 Series Inverted Bucket Steam Traps
Armstrong

Forged chrome-moly steel for vertical installation

For pressures to 2,700 psig (186 bar) . . .
Capacities to 6,500 lb/hr (2948 kg/hr)

Armstrong offers its 6000 Series forged chrome-moly steel traps for vertical installation with a choice of screwed (up to 900 psi/62 bar), socketweld or flanged connections.

A unique leverage system multiplies the force provided by the bucket to open the valve against system pressure. The mechanism is free-floating and has no fixed pivots to create wear or friction.

Because the mechanism is located at the top of the trap, no dirt can collect on the orifice. Small particles of dirt are held in suspension until discharged by the full differential purging action when the bucket sinks, pulling the valve off the seat.

The discharge orifice is surrounded by a water seal, which prevents live steam loss. Automatic air venting is provided by a small vent hole in the bucket. This provides continuous automatic air and CO2 venting at steam pressure.

Inverted buckets drain continuously, although discharging intermittently, to prevent condensate backup. They are also resistant to water hammer.




Download Center

Product Literature 

Installation and Maintenance

Submittal Drawing 
Related Items
814-816 Series Inverted Bucket Steam Traps
814-816 Series Inverted Bucket Steam Traps
400 Series Inverted Bucket Steam Traps
400 Series Inverted Bucket Steam Traps
1000 Series Inverted Bucket Steam Traps
1000 Series Inverted Bucket Steam Traps
1800 Series Inverted Bucket Steam Traps
1800 Series Inverted Bucket Steam Traps
SH-2500 Bimetallic Steam Traps
SH-2500 Bimetallic Steam Traps
SH-900 Series Bimetallic Superheat Steam Traps
SH-900 Series Bimetallic Superheat Steam Traps
Browse Similar Items