952-935-2345   24/7 SUPPORT

FIND PRODUCTS FOR:

Home>Utilization >Steam Traps

300 Series Inverted Bucket Steam Traps

300 Series Inverted Bucket Steam Traps
300 Series Inverted Bucket Steam Traps
Armstrong

Forged carbon steel for vertical installation

For pressures to 650 psig (45 bar) . . .
Capacities to 20,000 lb/hr (9072 kg/hr)

Armstrong offers its 300 series forged carbon steel traps for vertical installation with a choice of screwed, socketweld or flanged connections.

A unique leverage system multiplies the force provided by the bucket to open the valve against system pressure. The mechanism is free-floating and has no fixed pivots to create wear or friction.

Because the mechanism is located at the top of the trap, no dirt can collect on the orifice. Small particles of dirt are held in suspension until discharged by the full differential purging action when the bucket sinks, pulling the valve off the seat.

The discharge orifice is surrounded by a water seal, which prevents live steam loss. Automatic air venting is provided by a small vent hole in the bucket, which provides continuous automatic air and CO2 venting at steam temperature.

Inverted bucket traps drain continuously, although discharging intermittently, allowing no condensate backup. They are also resistant to water hammer.




Download Center

Product Literature

Installation and Maintenance 

Submittal Drawing 

Related Items
400 Series Inverted Bucket Steam Traps
400 Series Inverted Bucket Steam Traps
1800 Series Inverted Bucket Steam Traps
1800 Series Inverted Bucket Steam Traps
TT Series Thermostatic Steam Traps
TT Series Thermostatic Steam Traps
WT Series Thermostatic Wafer Steam Trap
WT Series Thermostatic Wafer Steam Trap
TS-2/TS-3 Radiator Traps
TS-2/TS-3 Radiator Traps
Steam Trap Options
Steam Trap Options
Browse Similar Items