Follow us on Call us for support at 952-935-2345. After hours messages are monitored 24/7

FIND PRODUCTS FOR:

Home > Utilization

Heatcraft Condenser Coil

Heatcraft Condenser Coil
Heatcraft

Coil construction is available for Condenser, Desuperheater, and Reheat applications.

Condenser - This coil takes the superheated vapor from the compressor and cools that vapor down to saturation. It then completely condenses all of the vapor into liquid, and continues to subcool the resulting liquid to a desired temperature below saturation.

Reheat - This is a hot gas reheat coil which takes the superheated vapor from the compressor and cools the vapor down to saturation. It then continues to condense a requested percentage of that vapor to a liquid.

Desuperheater - This coil takes the superheated vapor from the compressor and cools that vapor down to a requested temperature above saturation.

HEATCRAFT CONDENSER COIL CONSTRUCTION

Tubing 3/8" or 1/2" O.D. Copper, 5/8" O.D. Copper, Stainless Steel, or Carbon Steel
Circuiting Standard one section, Multiple sections
Rows 1, 2, 3, 4, 5, 6, 8, 10, 12
Fin Surface Sine Wave (corrugated), New Ripple (peak and valley) or Flat
Casing Galvanized Steel, Stainless Steel, Carbon Steel, Copper or Aluminum
Connections Copper Sweat, Carbon Steel or Stainless Steel

Download Center

Literature
Related Items
Models CCA/CCAF Condensate Collection Assemblies
Models CCA/CCAF Condensate Collection Assemblies
Model CSDV Thermostatic Drain Valves
Model CSDV Thermostatic Drain Valves
Water Temperature Control—Single Point of Use—Thermostatic
Water Temperature Control—Single Point of Use—Thermostatic
Prod. # 8066, 1/2
Prod. # 8066, 1/2" 316 SS BSS Style Light Spring Basic-Check® Threaded In-Line Check Valve
Suction DIffuser
Suction DIffuser
Heatcraft Fluid Coil
Heatcraft Fluid Coil
Browse Similar Items

Subscribe to our CS Update Newsletter: Join Our Mailing List

952-935-2345  emailinfo@campbell-sevey.com